Brother MFC-J4510DW Basic User's Manual page 133

i
Close the inside cover and Jam Clear
Cover. Make sure the covers are closed
properly.
j
(MFC-J4510DW)
Put the paper tray firmly back in the
machine.
(MFC-J4710DW)
Put the paper tray #1 and then tray #2
firmly back in the machine.
k
Using both hands, use the finger holds
on each side of the machine to lift the
scanner cover (1) into the open position.
Move the print head (if necessary) to
take out any paper remaining in this
area. Make sure that jammed paper is
not left in the corners of the machine (2)
and (3).
1
2
IMPORTANT
• If the paper is jammed under the print
head, unplug the machine from the power
source, and then move the print head to
take out the paper.
• If the print head is in the right corner as
shown in the illustration, you cannot move
the print head. Re-connect the power
cord. Hold down
moves to the center. Then unplug the
machine from the power source and take
out the paper.
• If ink gets on your skin or clothing,
immediately wash it off with soap or
detergent.
Troubleshooting
3
until the print head
119
B