Software Difficulties; Network Difficulties - Brother MFC-J4510DW Basic User's Manual

Software Difficulties

Difficulty
Cannot install software or print.
"Device Busy"
Cannot print images from
FaceFilter Studio.
®
(Windows )

Network Difficulties

Difficulty
Cannot print over the network.
The network scanning feature does
not work.
The network PC-Fax Receive
feature does not work.
Suggestions
®
(Windows only)
Run the Repair MFL-Pro Suite program on the CD-ROM. This program will repair
and reinstall the software.
Make sure the machine is not showing an error message on the Touchscreen.
To use FaceFilter Studio, you must install the FaceFilter Studio application from
the CD-ROM supplied with your machine. (See Quick Setup Guide.)
Also, before you start FaceFilter Studio for the first time, you must make sure your
Brother machine is turned on and connected to your computer. This will allow you
to access all the functions of FaceFilter Studio.
Suggestions
Make sure that your machine is powered on and is online and in Ready mode.
Print a Network Configuration list (See Advanced User's Guide: Reports.) and
check the current Network settings printed in this list. Reconnect the LAN cable to
the hub to verify that the cabling and network connections are good. If possible,
try connecting the machine to a different port on your hub using a different cable.
If the connections are good, the machine shows LAN Active for 2 seconds.
If you are using a wireless connection or are having Network problems,
see Network User's Guide: Troubleshooting.
It is necessary to configure the third-party Security/Firewall Software to allow
Network scanning. To add port 54925 for Network scanning, enter the information
below:
In Name: Enter any description, for example Brother NetScan.
In Port number: Enter 54925.
In Protocol: UDP is selected.
Please refer to the instruction manual that came with your third-party
Security/Firewall Software or contact the software manufacturer.
(Macintosh)
Re-select your network machine in the Device Selector window from the Model
pop-up menu in the main screen of ControlCenter2.
®
(Windows only)
It is necessary to set the third-party Security/Firewall Software to allow PC-FAX
Rx. To add port 54926 for Network PC-FAX Rx, enter the information below:
In Name: Enter any description, for example Brother PC-FAX Rx.
In Port number: Enter 54926.
In Protocol: UDP is selected.
Please refer to the instruction manual that came with your third-party
Security/Firewall Software or contact the software manufacturer.
Troubleshooting
133
B