Loading Paper; Loading Paper And Other Print Media; Loading Paper In Paper Tray #1 - Brother MFC-J4510DW Basic User's Manual

2

Loading paper

Loading paper and
other print media
CAUTION
DO NOT carry the machine by holding the
scanner cover, the Jam Clear Cover, the
manual feed slot cover, or the control panel.
Doing this may cause the machine to slip
out of your hands. Carry the machine by
sliding your hands into the handhold
indentations located on each side of the
machine.
For detailed information, see Product
Safety Guide.
NOTE
(For MFC-J4710DW)
For tray #2 (lower tray), see Loading
paper in paper tray #2 (MFC-J4710DW)
on page 26.
Loading paper in paper
tray #1
Load only one size of paper and one type of
paper in the paper tray at a time.
a
Pull the paper tray completely out of the
machine.
NOTE
• If the paper support flap (1) is open, close
it, and then close the paper support (2).
2
• When you load a different paper size in
the tray, you will need to change the paper
size setting in the machine at the same
time.
(MFC-J4510DW: See Paper Size
on page 38.)
(MFC-J4710DW: See Paper Size and
Type (MFC-J4710DW) on page 39.)
b
Open the output paper tray cover (1).
1
2
2
2
1
2
19