Moving Your Machine - Oki MB491 User Manual

Moving Your Machine

Moving Your Machine
This section explains how to move or transport your machine.
Moving Your Machine
Hold down the power switch for about a
1
second to turn on the power.
Reference
"Turning Off Your Machine" (P. 20)
Unplug all the cables.
2
AC cable and ground wire
Ethernet or USB cable
Telephone cable(s)
Remove any paper from the paper trays.
3
lift your machine and move it to a new
4
location.
Transporting Your Machine
CAUTION
The fuser unit is extremely hot. Do not touch it.
Note
The image drum (the green tube) is very delicate. Handle
it carefully.
Do not expose the image drum to direct sunlight or very
bright interior light (approximately more than 1500 lux).
Even under the normal interior light, do not leave it for
more than 5 minutes.
Hold down the power switch for about a
1
second to turn on the power.
Reference
"Turning Off Your Machine" (P. 20)
Unplug all the cables.
2
AC cable and ground wire.
Ethernet or USB cable.
Telephone cable(s)
Remove any paper from the paper trays.
3
Open the scanner unit.
4
Possible to get
burned.
Press the top cover open button (1) and
5
open the top cover.
1
Close the top cover.
6
Close the scanner unit.
7
Remove the optional second tray unit
8
from the main unit if it is installed.
Remove the lock parts and lift your machine, and
then remove the second tray unit.
- 168 -