Multipurpose Tray - Oki MB491 User Manual

and pull out the paper carefully. If you
cannot remove the paper by following
Steps (A)1 and (A)2, pull out the paper
by following Steps (B).
(A)1
(B)1
If you have failed to remove jammed
•
paper, do not force to pull out the paper
but follow the steps below.
Return the image drum cartridge into the
printer, and close the top cover.
Turn the printer Power switch OFF (O) first,
and then turn it ON (I) again. When the motor
starts to rotate, hold the top end of paper and
pull out the paper.
Note
If paper jams when you load papers, check to see that no
paper remains in each paper feed unit. Remember that
you can release the alarm display only after you have
opened the top cover first and then closed it again.
Re-install the image drum complete with
6
toner cartridge, ensuring that the pegs
(1 & 2) correctly locate into the slots on
each side of the printer (3).
(A)2
(B)2
- 129 -
Close the top cover.
7
Close the scanner unit.
8
Error Code 390 (Paper feed jam

(Multipurpose tray))

Remove any documents from the
1
document tray if any.
Open the scanner unit.
2
Press the top cover open button (1) and
3
open the top cover.
Carefully lift out the image drum,
4
complete with the toner cartridge. Be
careful not to touch or scratch the green
drum surface.
If the top end of paper is visible at the
5
rear side of transparent resist guide,
rotate the resist guide toward the fuser
unit and hold the paper top end and
carefully pull out the paper.
Paper Jams
7