Intended Audience - HP D5970A - NetServer - LCII Configuration Manual

Notice
The information in this document is subject to change without notice.
Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the
implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be
liable for errors contained herein or for incidental or consequential damages in connection with the
furnishing, performance, or use of this material. Hewlett-Packard assumes no responsibility for the use or
reliability of its software on equipment that is not furnished by Hewlett-Packard.
This document contains proprietary information that is protected by copyright. All rights are reserved. No
part of this document may be photocopied, reproduced, or translated to another language without the prior
written consent of Hewlett-Packard Company.
The use of trademarks or other designations is for reference purposes only. The following trademarks are
used in this manual:
Microsoft and MS-DOS are U.S. registered trademarks of Microsoft Corp.
Windows and Windows NT are trademarks of Microsoft Corporation.
Hewlett-Packard
Network Server Division
10955 Tantau Avenue
Cupertino, CA 95014-0770, USA
© Copyright 1999, Hewlett-Packard Company

Intended Audience

This supplement is for the person who installs, administers, and troubleshoots the Microsoft Cluster Server.
Hewlett-Packard Company assumes this person is qualified to service computer equipment and trained to
recognize hazards in products with hazardous energy levels.
NOTE
Hewlett-Packard only supports and recommends installation of clustered HP NetServer
systems using Microsoft Cluster Server software by a Microsoft or HP Cluster Certified
Installer.
Version History
Date
8 March 99
NetRAID Supplement to the HP NetServer Microsoft Cluster Installation Guide
Change
Revised to add instructions for HP Rack Storage/12.
2