HP Z1 User Manual page 22

Hp z1 workstation user guide

Hide thumbs Also See for Z1:

Table of Contents

Turn on the power on the bottom of the mouse (1) and remove the battery tab on the bottom of the

keyboard. Make sure the mouse and keyboard are within 30 cm (12 in) of the workstation and

away from interference from other devices. Press the connect button on the mouse (2) for five

seconds, then press the connect button on the keyboard (3) for five seconds. Place them in front of

the workstation.

Figure 3-7

Activate wireless keyboard and mouse

NOTE:

The workstation has an internal USB port for the wireless keyboard/mouse receiver. If

you:

— Ordered a keyboard and mouse with your workstation, the receiver is already installed.

— Order a wireless keyboard and mouse as an after-market option, see

Installing the USB

keyboard/mouse receiver on page 16

for instructions on installing the receiver.

— Did not order a keyboard and mouse, you can plug a wired USB keyboard and mouse into the

ports on the workstation.

Chapter 3 Setting up and using the workstation

Table of Contents

Troubleshooting