Connecting to the Internet
The HP Z1 Workstation has built-in wireless LAN and also supports wired LAN.
For a wireless network connection, use a wireless router with the computer to connect to a WLAN
●
with an Internet connection. When the you configure Windows the first time, WLAN is
automatically turned on and enabled. All wireless networks available in the area are shown.
Choose the appropriate network.
Figure 3-8
For a wired network connection, connect an Ethernet cable to the computer and to a network
●
router or LAN device.
Figure 3-9
Enabling Bluetooth Devices
The workstation is Bluetooth-enabled. To connect a Bluetooth wireless device:
1.
Make your Bluetooth device send out a radio signal so that it is discoverable by the workstation
(refer to the device documentation for instructions).
2.
In the Windows Control Panel, go to Hardware and Sound.
If your Bluetooth device is a printer, click Printers, click Add a printer, and follow the on-
●
screen instructions.
For all other devices, click Bluetooth Devices, click Add, and then follow the on-screen
●
instructions.
Wireless LAN
Wired LAN
Setting up the workstation
15