HP Color LaserJet 9500 Administrator's Manual page 15

Table 2-3 STACK OPTION
Face Up
Face Down
Table 2-4 FOLD LINE ADJUST
FOLD LINE ADJUST LTR-R and A4-R
FOLD LINE ADJUST LEGAL and JISB4
FOLD LINE ADJUST 11 by 17 and A3
Adjust the fold-line position depending on the sheet size. Adjustments are in +/- .15 mm (0.006 inch)
increments, with a maximum range of +/- 2.1 mm (0.082 inch).
NOTE: If the fold line and the stitch position do not match, call for service.
Table 2-5 STAPLES OUT
Continue
Stop
Table 2-6 SADDLE STITCH
NOTE: This option is available only for color printers or MFPs.
Two Staples
Four Staples
ENWW
If the default action is set to
are stacked face-up.
If the default action is set to
jobs are stacked face-down.
Select LTR-R & A4-R to adjust the fold line for 8.5 x 11-inch or
8.26 x 11-inch sheets.
Select LEGAL & JISB4 to adjust the fold line for 8.5 x 14-inch
or JIS B4 sheets.
Select 11x17 & A3 to adjust the fold line for 11 x 17-inch or A3
sheets.
If the default action is set to CONTINUE, the multifunction
finisher continues handling jobs from the printer that require
staples even if the stapler cartridge is empty.
If the default action is set to STOP, the multifunction finisher
goes offline until a new stapler cartridge is loaded when jobs
from the printer require staples. See
on page 17.
If the default action is set to TWO
to bin 2 are saddle stitched with two staples.
If the default action is set to
sent to bin 2 are saddle stitched with four staples.
Configure default control-panel settings
FACE UP, all of the printing jobs
FACE DOWN, all of the printing
Load the stapler cartridge
STAPLES, all of the jobs sent
FOUR STAPLES, all of the jobs
9