Reassembling the computer
1.
Replace the side access panel.
2.
Reconnect the power cord to the computer and plug the power cord into a power outlet.
Activating the Solenoid Lock
NOTE:
The Hood Sensor does not require activation. It is recognized and activated automatically by
the computer.
1.
Turn on or restart the computer.
2.
Repeatedly press and release the
NOTE:
then on again, and press the
3.
Select Security > Smart Cover > Lock.
4.
Before exiting, select File > Save Changes and Exit.
Remote security management
It is possible to remotely lock and unlock the Solenoid Lock using Remote Access Software. Refer to
www.hp.com/go/hpcmi
a networked environment.
ENWW
If you do not press the
F10
for tools you can use to remotely manage the computer and BIOS settings in
F10
key until the Computer Setup Utilities menu appears.
F10
key at the appropriate time, you must turn the computer off,
key again to access Computer Setup.
Reassembling the computer
5