Step 4-Reassembling The Computer; Step 5-Configuring The Computer; Regulatory Notices; Technical Support - HP Z200 - Small Form Factor Workstation Installation Manual

Step 4—Reassembling the computer
1. Reinstall the card support, if applicable.
2. Reinstall the side access panel.
3. Reconnect power to the computer and all external devices.
4. Restore power to the computer and all external devices.
Step 5—Configuring the computer
When powering up the computer after installation, a new hard drive identifies itself as un-initialized
storage. Consult the operating system documentation for information about how to set up the new
drive.
NOTE: Some operating systems such as Microsoft® Windows Vista® automatically schedule
defragmenting sessions. This offers no benefit for an SSD, therefore the user can remove the
automatic scheduling. This will also save energy. Go into
and then select
hard drive. Select

Regulatory notices

This product has been tested and found to comply with the limits for a Class B digital device of the
FCC Rules. Refer to the documentation that came with the computer for additional regulatory
information governing this product.

Technical support

Comprehensive technical support is available online at http://www.hp.com/support.
You can also call HP for technical support. For support telephone numbers, refer to the
documentation supplied with the computer.
Japanese 日本語
This document is available in Japanese. See http://www.hp.com/support/manuals, then select your
product and select Japanese from the drop down Manual Language menu.
このドキュメントは日本語版が用意されています。http://www.hp.com/support/manuals
し、ご使用のワークステーション製品を選択し、Manual Language ドロップダウン メニューから
Japanese を選択してください。
8 HP SATA/SAS hard drive and Solid State Drive installation
System and Maintenance. In the
Select Volumes and then uncheck the box for any SSD disks or volumes.
Control Panel, select
Administrative Tools area select
Control Panel Home,
Defragment your
にアクセス
ENWW