7. Connect the power and data cables to the rear of the device installed in the middle
shelf. (The connectors are shaped to go in one way only.) If you are installing a CD-
ROM drive, refer to the manual supplied with the drive for detailed installation
instructions.
Connector for 5.25-inch Device
Connector for Flexible Disk
Drive or CD-ROM
8. Replace the hard disk drive in the rear shelf.
9. Modify the cover so you can use the device in the middle shelf. Turn the cover upside
down. Unclip the locking tab, and lift the panel out.
HP Vectra PC User's Guide
3 Installing Accessories In Your PC
Data Cable
Power Cable
58