HP Vectra VE 4/xx User Manual page 2

Plug and Play
Installing the Board
Installing Mass Storage Devices
Installing an IDE Hard Disk Drive in the Bottom Shelf
Installing a Flexible Disk Drive or a CD-ROM Drive in the Middle Shelf
Installing or Replacing an IDE Hard Disk Drive in the Rear Shelf
Installing an Upgrade Processor
Installing the Security Bracket
Checking the Installation
Configuring Your PC
Using the Setup Program to Configure the PC
Using HP User Tools to Configure Video Settings
4 Troubleshooting
The PC Does Not Work
No Error Messages Displayed
After Installing an Accessory
Error Messages
If a System ROM Message Appears
If a Power-On Error Message Appears
Power-On Errors That May Prevent the PC from Starting
BIOS and Operating System Messages
Hardware Problems
The Display Does Not Work
If Your Display is Blurred or Unreadable
If You Cannot Activate any Video Resolution Higher than 640 x 480
The Keyboard or Mouse Does Not Work
The Printer Does Not Work
The Flexible Disk Drive Does Not Work
The Hard Disk Does Not Work
The Hard Disk Activity Light Does Not Work
An Accessory Board Does Not Work
You Lose the Key
You Need to Replace the Battery
To Install the External Battery
To Install a Replacement Battery
Software Problems
You Have Forgotten a Password
You Can't Start the Setup Program
Your Application Software Does Not Work
Power Management Does Not Work
Power Management in Windows
Power Management in DOS
The Date and Time are Incorrect
5 Technical Information
Specifications
Features and Characteristics
HP Vectra PC User's Guide 1 Setting Up Your PC 2