Chapter 5
7. Spread the two retaining latches on the slot outward. See Figure 5-3.
8. Align the notches on the DIMM with the keys on the slot.
See Figure 5-3.
9. Holding the DIMM at 90 degrees to the system board, press the DIMM fully
into the slot until the retaining latches close. See Figure 5-4.
If the latches do not close, the DIMM is not inserted correctly.
Keys
Retaining Latches
DIMM Slot
Figure 5-3. DIMM to Slot Alignment
Installing Additional Memory
Notches
41