Setting Up The Target Thin Clients - HP T5145 - Thin Client - Tower Manual

Setting Up the Target Thin Clients

NOTE
Because FTP update will check the image name format,
change the HP ThinPro image name to the
HP ThinConnect name format before updating.
1. On HP ThinConnect, in the HP ThinConnect Settings Manager on the
Management tab, click Enable Automatic Update in the FTP area.
2. Type the FTP address in the field.
3. Type / in the FTP Location field. Click OK and reboot the thin client.
After rebooting, HP ThinConnect will be updated to HP ThinPro.
20