HP T5145 - Thin Client - Tower Manual page 13

NOTE
It may take a few minutes to add the element to the server.
g. Click OK to add the element to the list, and then click Close.
h. Click the Imaging tab.
i. In the list, double-click _PXE Imaging to create a task from PXE Imaging
templates.
j. On the Content tab in the Action area, select Push PXE image to device. In
the PXE Image area, select the PXE Image Name.
k. Click Save As and type the template name in the field. Click OK.
2. Deploy the HP ThinPro master image to the target thin clients:
a. On the device tree, right-click the thin client(s) to be reimaged and select
Send task.
b. Select the template you created and click Next. Click OK.
c. The target thin clients automatically reboot after the new image is installed.
HP ThinConnect is now updated to HP ThinPro.
13