Led Codes - HP t200 Zero Maintenance And Service Manual

Switching from USB to PS/2 mouse or keyboard (and vice versa) requires the stations to be remapped.
Cause
The MultiPoint operating system stores the previous
mapping of keyboards and mice to each display, and it
attempts to continue to use that mapping.
The host USB mouse has failed on some USB ports after re-associating .
Cause
Not all pairs of USB ports on the host PC can be used for a
USB keyboard and mouse.
WMSReserved and SRCShell user accounts are found.
Cause
These user accounts exist on purpose.
Auto-Logon did not work properly.
Cause
The MP2011 Auto-Login feature cannot work if the user
account used does not have a password.

LED Codes

Table 2-1 USB-connected HP t200 Zero Client for MultiSeat
Solid amber
Solid blue
Table 2-2 Ethernet–connected HP t200 Zero Client for MultiSeat
Blinking alternately blue and amber
Blinking amber
Blinking blue
Solid blue
Solution
Use the Remap all stations feature in the MultiPoint
Manager when changing keyboard or mouse configurations
in any way.
Solution
HP highly recommends using a PS/2 keyboard and a PS/2
mouse on the host PC.
Solution
These user accounts are a critical part of the Windows
MultiPoint 2011 operating system and should not be deleted
or tampered with.
Solution
Set a password on the user account.
USB-powered
DC-powered
not assigned to a host PC
looking for host that matches hotkey
looking for host which is currently assigned
connected to assigned host
LED Codes 15