Epson SureLab D3000 - Double Roll Administrator's Manual page 36

Calibration
Click Calibration (0341) from Color Calibration (034) to display the screen.
You can perform calibration by using the following work flow.
Create Correction Print
Value
Measure Color
Create Correction Value
Correction Value Print
Verification
Measure Color
Write
Tip:
O After adjusting values for Gray Adjustment, perform Color Calibration, and then make the settings again.
U "Gray Adjustment" on page 47
O Click Date of Adjustment to display the time when it was last adjusted. You can check the changed date settings for
each Paper Surface Type.
Settings/Maintenance
Print a correction chart: Prints a chart for adjustment.
Measure color for the correction chart:
Perform color measurement for the printed chart on the Client PC with a
connected color measurement device.
Creating a correction value: Create a correction value file.
Print a verification chart: Prints a verification chart.
Measure color for the verification chart:
Perform color measurement for the printed chart on the Client PC with a
connected color measurement device.
Verify correction accuracy:
Verify the accuracy of the created correction value to complete the
correction value file creation process.
37