Settings For Optional Equipment - Epson SureLab D3000 - Double Roll Administrator's Manual

Settings for Optional Equipment

Click Settings for Optional Equipment (012) from System Operation Settings/Inspections (01) to display the
screen. Make settings for optional equipment that has been installed.
After changing settings, click Apply to apply the changes.
Item
Back Printing Unit
Settings/Maintenance
Attached/Not Displays the installation status for the back printing unit.
Attached
Print Density Adjust the print density for the back printing unit heads in seven levels.
Control
This can be set when the back printing unit is Attached.
(Head 1/Head 2)
Select Roll Paper Select the roll paper feeder you want to use for the test print.
This can be selected when the back printing unit is Attached and paper is
loaded.
Paper Surface Type Displays the Paper Surface Type of the paper loaded in the roll paper
feeder.
"-" is displayed when roll paper is not loaded.
Test Print Click to perform a test print.
This can be performed when the back printing unit is Attached and the
roll paper feeder is selected.
This cannot be performed when the Paper Surface Type does not
support back printing.
Explanation
21