Epson SureLab D3000 - Double Roll Administrator's Manual page 21

Item
Sorter/Long Paper
Ejection Unit
Humidity Control Unit
Back
Help
Date of Adjustment
Apply
Tip:
O Only the Dual Roll Model supports front roll paper. For the Single Roll Model, information is not displayed under the
front paper item. See the information for rear roll paper.
Settings/Maintenance
Attached/Not Displays the installation status for the Sorter/Long Paper Ejection Unit.
Attached
Sorter Select Enabled or Disabled for the sorter.
This can be set when the Sorter/Long Paper Ejection Unit is Attached.
When changing from Disabled to Enabled, you need to restart the
printer.
Attached/Not Displays the installation status for the humidity control unit.
Attached
Set by service personnel.
Click to close the Settings/Maintenance screen.
Click to display the Help.
Displays the time when Print Density Control was last performed.
You can check the changed date settings for each Paper Surface Type.
Click to apply any changed settings.
Explanation
22