Epson SureLab D3000 - Double Roll Administrator's Manual page 37

Print a correction chart
A
Select the roll paper feeder used for printing in
Paper.
Displays the Paper Width and Paper Surface
Type for the paper loaded in the selected roll
paper feeder.
Tip:
O Click Applicable Paper Surface Type to
check the relations between the paper used
for creating a correction value and the paper
applied the created correction value.
O Only the Dual Roll Model supports front
roll paper. For the Single Roll Model, see the
information for rear roll paper.
B
Select the color measurement device.
C
Select the standard value you want to use.
When collectively creating the correction values
that will be compatible with each paper surface
type, check Use Standard Value for Collective
Creation, and then select the standard value
from the list. When using a standard value for
each paper surface type, check Specify Standard
Value, and then select the standard value from
the list.
Note:
When collectively creating the correction values,
make sure you use Glossy paper.
Tip:
The initial calibration file provided contains
standard values for a standard printer. To
minimize the color difference between multiple
printers, check Specify Standard Value, and
then select the standard value file created by the
main printer.
U "Create Calibration" on page 45
Settings/Maintenance
D
Click Print from Correction Value Creation
Phase.
A confirmation screen is displayed.
E
Click Yes.
Click No to cancel printing.
For Use Standard Value for Collective Creation,
a total of three charts are printed. These include
standard and high image quality for
Glossy/Luster, and standard for Matte.
For Specify Standard Value using Glossy/Luster
surface type, a total of two charts are printed.
These include standard and high image quality.
For Specify Standard Value using Matte surface
type, one standard chart is printed.
Tip:
O Nozzle Check is performed automatically
O The number of charts printed varies
38
before printing. If clogging is detected in the
head, Print again after cleaning the head
and clearing the clogged nozzles.
U "Head Cleaning" on page 27
depending on the settings and the paper.