HP Rp3000 - Point of Sale System Hardware Reference Manual page 44

Hardware reference guide - hp rp3000

Hide thumbs Also See for Rp3000 - Point of Sale System:

Table of Contents

Connect the data cable to the riser card (1) and the expansion card (2). Connect the power

cable to the expansion card (3).

Figure C-11

Replace the computer cover.

Reconnect the power cord and any external devices, then turn on the computer.

10.

Lock any security devices that were disengaged when the computer cover was removed.

11.

If the serial ports are configured in powered mode, connect the powered Point of Sale device.

Appendix C Powered Serial Ports

Connecting Data and Power Cables to the Powered Serial Port Expansion Card

ENWW

Table of Contents