A-Class Server Installation
Cabinet-Mounted A-Class Server System Unpack and Install
External Connections
External devices are interfaced with the A-Class server by means of specific connectors
located in the rear of the server. Exterior connections to the server include ports for:
•
•
•
•
Connect External Small Computer System Interface (SCSI) Devices
Connect external SCSI devices to the Single Ended SCSI bus (labeled SCSI
(Single-Ended) 8/16/5) on the system card or to additional SCSI interface cards. If
external devices will not be connected to the SCSI bus, make sure the terminator
(1252-3932) is in place.
Make sure all devices on the SCSI bus have a unique address and the last device is
terminated. Refer to the documentation accompanying each device to learn how to set
addresses and where to place terminators.
38
Small Computer System Interface (SCSI) devices
System Consoles
Local Area Networks (LANs)
Power Cords.
Chapter 2