External antenna
Internal WLAN antennae are standard. If the computer is to be installed in a metal kiosk or other enclosure,
you may wish or need to use an external WLAN antenna.
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
Remove the hard drive
4.
Remove the drive cage
5.
Locate the WLAN module on the system board.
6.
Disconnect the internal antennae from the WLAN module.
For instructions, see
7.
Locate both external antenna positions on the rear of the chassis.
30
Chapter 4 Removal and replacement procedures – desktop mini (DM) chassis
(Preparation for disassembly on page
(Access panel on page
(Hard drive on page
23).
(Drive cage on page
25).
WLAN module on page
28.
19).
18).