Software Recovery After A Hard Disk Failure; Solving Recovery Problems - IBM NetVista A22p Quick Reference

(english) quick reference guide
Hide thumbs Also See for NetVista A22p:
Table of Contents

Advertisement

3. Did the Product Recovery program start after you pressed F11?
Yes - Go to step 5.
No - If you have a Product Recovery CD, go to step 4. Otherwise, go to

"Solving recovery problems".

4. Insert the Product Recovery CD into the CD drive (if you have more than
one CD, insert CD 1). Restart the computer. If the computer does not start
the Product Recovery program from the CD, you might not have your CD
drive or DVD drive listed in the startup sequence. Set your CD drive or
DVD drive as the first device in the startup sequence. See "Changing the
startup sequence" on page 16 for details.
5. When the Product Recovery program starts, you might have the
opportunity to select an operating system. If a menu of operating systems
is displayed, use the arrow keys to select the appropriate operating system,
and press Enter.
6. Follow the instructions on the screen. Your computer might restart during
the recovery process, possibly more than once. When the recovery process
is finished, a completion message is displayed.
Notes:
1. After recovery, you might have to reinstall device drivers for some devices.
If you need to reinstall device drivers, see "Recovering or installing device
drivers" on page 16.
2. Some computers come with Microsoft Office or Microsoft Works
preinstalled. If you need to recover your Microsoft Office or Microsoft
Works applications, you must use the Microsoft Office CD or Microsoft Works
CD. These CDs are provided only with computers that come with Microsoft
Office or Microsoft Works preinstalled.

Software recovery after a hard disk failure

When the hard disk drive is replaced because of a failure, no Product Recovery
program is on the new hard disk. In this case, you must use the Product
Recovery CD for your computer. If you have a Product Recovery CD, go to step 4
for instructions for recovering the software. If a Product Recovery CD was not
provided with your computer, contact IBM and order a Product Recovery CD for
your computer. See "Chapter 5. Getting information, help, and service" on
page 25 for details.
Solving recovery problems
Use the information in this section if you are unable to access the Product
Recovery program.
14
Quick Reference

Advertisement

Table of Contents
loading

Table of Contents