IBM NetVista Hardware Maintenance Manual page 36

4. Remove the metal shield from the drive bay by inserting a flat-blade
5. Make sure the drive that you are installing is set correctly as either a master or
30
Hardware Maintenance Manual
screwdriver into one of the slots and gently prying it loose.
a slave device.
v If it is the first CD-ROM drive or DVD-ROM drive, set it as a master device.
v If it is an additional CD-ROM drive or DVD-ROM drive, set it as a slave
device.
v If it is an additional hard disk drive, set it as a slave device.
Refer to the documentation that comes with your drive for master/slave
jumper information.