IBM NetVista Hardware Maintenance Manual page 102

5. After all beeps cease, power off the computer and move the recovery jumper to
6. When the Flash Update Utility appears, select the country/keyboard, then press
7. If the computer serial number was previously recorded, the number is
8. Type the 7-digit serial number of the computer you are servicing, then press
9. Follow the instructions on the screen to complete the flash (BIOS/VPD) update
96
Hardware Maintenance Manual
the normal position. Then replace the cover and power-on the computer.
Enter.
displayed with an option to update it. Press Y to update the serial number.
Enter.
procedure.