Advertisement
Models
AT-8948, x900-48FE, x900-48FE-N
AT-9924T, AT-9924SP, AT-9924T/4SP
AT-9812T, AT-9816GB
Caution: Using a maintenance version on the wrong model may cause unpredictable results, including disruption to the network.
This maintenance release note should be read in conjunction with the Release Note for Software Version 2.8.1.
Caution: Information in this release note is subject to change without notice and does not represent a commitment on the part of Allied Telesis Inc. While every
effort has been made to ensure that the information contained within this document and the features and changes described are accurate, Allied Telesis Inc. can
not accept any type of liability for errors in, or omissions arising from the use of this information.
Enabling and Installing this Release
To use this maintenance release you must have a base release license for Software Release 2.8.1. Contact your distributor or reseller for more information. To
enable this release and install it as the preferred release, use the commands:
enable rel=xx281-01.rez num=2.8.1
set install=pref rel=xx281-01.rez
where xx is the prefix to the filename, as shown in the table on page 1. For example, to install the release on an AR440S router, use the commands:
enable rel=54281-01.rez num=2.8.1
set install=pref rel=54281-01.rez
Version 281-01
C613-10482-00 REV A
Series
Release File
x900-48
89281-01.rez
AT-9900
89281-01.rez
AT-9800
sb281-01.rez
Enabling and Installing this Release
Date
Size (bytes)
26 July 2006
4786652
26 July 2006
4786652
26 July 2006
3865056
GUI file
-
9924_281-01_en_d.rsc
9812_281-01_en_d.rsc
9816_281-01_en_d.rsc
2
Advertisement
