Advertisement
CR
Module
Level
CR00012270
Remote Telnet
CR00012581
PPP
CR00012655
GUI
CR00012755
Install,
Stacking
CR00012774
IP Gateway,
TCP
CR00012824
GUI
Version 281-01
C613-10482-00 REV A
4
The "?" help description for the enable command stated that the parameter
rtelnet would "Disable the use of remote telnet to control an asyn port".
This issue has been resolved. The query now states that the command enable
rtelnet enables remote telnet.
4
Output of the command show ppp idletimer did not display the PPP interface
name.
This issue has been resolved.
4
The web-based Graphical User Interface (GUI) did not display software QoS
counters.
This issue has been resolved. The counters now display correctly. To access them,
select Diagnostics in the left-hand menu.
4
If the local command show config dynamic was entered as a host-directed
command, the switch gave an incorrect error message.
This issue has been resolved. If you attempt to direct show config dynamic to
a host, the switch now responds with the message "Command is local, do not
use host direction".
4
In an unusual network configuration where the IP subnet on one interface was a
subset of that on another interface, it was possible for the results of a trace route
to show erroneous information.
This issue has been resolved. A search for an interface using an address within
the interface's subnet now finds the most specific match for the address.
4
Internet Explorer did not display the switch trunking summary page correctly. If
the user selected a trunk group, the radio button displayed a grey image, instead
of displaying a black dot inside a circle. This was only a display issue—the GUI
acted on the selected trunk group correctly.
This issue has been resolved.
Description
Features in 281-01
Y
Y
Y
Y
-
-
-
-
Y
Y
Y
Y
Y
-
-
Y
Y
Y
Y
Y
-
-
-
-
-
-
-
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
-
-
-
Y
Y
Y
Y
Y
19
-
-
Y
Y
-
-
Y
-
Y
Y
Y
Y
Advertisement
