Mezzanine Card Option - HP BL685c - ProLiant - 4 GB RAM User Manual

Remove the server blade (on page 15).
2.
Remove the access panel (on page 15).
3.
Remove the DIMM baffle.
4.
Open the DIMM slot latches.
5.
Install the DIMM.
6.
Install the DIMM baffle (on page 16).
7.
Install the access panel (on page 16).
8.
Install the server blade
9.

Mezzanine card option

Optional mezzanine cards enable network connectivity and provide Fibre Channel support. For
mezzanine card locations, see "System board components (on page 9)."
For mezzanine card signal mapping, see the HP ProLiant BL685c Generation 5 Server Blade Installation
Instructions that ship with the server blade.
Optional mezzanine cards are classified as Type I mezzanine cards and Type II mezzanine cards. The
card type determines where it can be installed in the server blade:
Install Type I mezzanine cards on any mezzanine connector.
Install Type II mezzanine cards only on Mezzanine 2 connector or Mezzanine 3 connector.
To install the component:
Power down the server blade (on page 14).
1.
Remove the server blade (on page 15).
2.
Remove the access panel (on page 15).
3.
("Installing a server blade" on page 19).
Hardware options installation 35