Hardware Options Installation; Introduction; Hot-Plug Sas Or Sata Hard Drive Option - HP BL685c - ProLiant - 4 GB RAM User Manual

Hardware options installation

Introduction

If more than one option is being installed, read the installation instructions for all the hardware options
and identify similar steps to streamline the installation process.
WARNING:
internal system components to cool before touching them.
CAUTION:
beginning any installation procedure. Improper grounding can cause electrostatic discharge.

Hot-plug SAS or SATA hard drive option

The server blade supports up to two hot-plug SAS or SATA drives.
CAUTION:
or the enclosure unless all hard drive and device bays are populated with either a component
or a blank.
To install the component:
Remove the hard drive blank.
1.
To reduce the risk of personal injury from hot surfaces, allow the drives and the
To prevent damage to electrical components, properly ground the server before
To prevent improper cooling and thermal damage, do not operate the server blade
Hardware options installation 25