Default Factory Settings - NETGEAR WGX102 - 54 Mbps Wall-Plugged Wireless Range Extender Reference Manual

Reference Manual for the 54 Mbps Wall-Plugged Wireless Range Extender WGX102

Default Factory Settings

When you first receive your WGX102, the default factory settings are shown below. You can
restore these defaults with the factory default reset button on the bottom of the unit.
Wireless Access List (MAC Filtering)
SSID broadcast
802.11b/g RF Channel
Authentication Type
WEP and WPA-PSK
After you install the Wireless Range Extender, use the procedures below to customize any of the
settings to better meet your networking needs.
5-6
FEATURE DEFAULT FACTORY SETTINGS
All wireless stations allowed
Enabled
SSID NETGEAR
11
Mode g and b
Automatic
Disabled
202-10042-02 v1.1
Wireless Configuration and Security