The Xe102 Wall-Plugged Ethernet Bridge - NETGEAR WGX102 - 54 Mbps Wall-Plugged Wireless Range Extender Reference Manual

Reference Manual for the 54 Mbps Wall-Plugged Wireless Range Extender WGX102

The XE102 Wall-Plugged Ethernet Bridge

he front panel of the XE102 contains the status lights described below.
Figure 2-3: XE102 Front Panel
You can use the status lights to verify connections. Viewed from top to bottom, the table below
describes the lights on the front panel.
Table 2-1. Status Light Descriptions
Label
Power
HomePlug
Ethernet
2-6
Activity
On Green Solid Power is supplied to the XE102.
Blink Power on self test.
Off Power is not supplied to the XE102.
On The HomePlug port has detected a link with an attached
device.
Off No devices are attached on the Powerline network.
On The Ethernet port has an Ethernet cable connected to a
powered on device such as a switch, router, or computer.
Blink Data is being transmitted or received by the wireless port.
Off There is no active Ethernet connection.
202-10042-02 v1.1
Description
Introduction