Return The Extender To Its Factory Default Settings; Use The Reset Button; Log In And Reset The Extender To Factory Settings - NETGEAR EX7300v2 User Manual

A confirmation pop-up window opens.
9. Confirm your decision.
The extender configuration is restored and the extender restarts. This process takes
about one minute.
Return the extender to its factory default
settings
Under some circumstances (for example, if you lose track of the changes that you made
to the extender settings), you might want to erase the configuration and reset the
extender to factory default settings.
To reset the extender to factory default settings, you can either use the Reset button
on the back panel or log in to the extender and reset it.

Use the Reset button

Caution:
This process erases any settings that you configured in the extender.
To use the Reset button to return the extender to its factory default settings:
1. Insert a straightened paper clip into the hole of the Reset button and hold it for
about seven seconds.
2. Release the button.
Caution:
Do not try to go online, turn off the extender, shut down the computer, or
do anything else to the extender until it finishes restarting!
The extender resets and restarts. This process takes about one minute.

Log in and reset the extender to factory settings

Caution:
This process erases any settings that you configured in the extender.
Maintain and monitor the
extender
AC2200 Nighthawk X4 X4 WiFi Mesh Extender
50 User Manual