Reference Manual for the 54 Mbps Wall-Plugged Wireless Range Extender WGX102
Router Mode WGX102 Internet Connection Setup
This section describes how to set up the WGX102 as the only router on your local area network
(LAN) and connect to the Internet. If you already have another router on your LAN, you do not
need to configure the WGX102 in Router Mode and do not need to read this section. The figure
below illustrates the 54 Mbps Wall-Plugged Wireless Range Extender WGX102 in Router Mode:
Figure 7-3: WGX102 in Router Mode
Warning: In router mode, you can only use one XE102 bridge. You cannot have any other XE102
bridges on the same network.
Follow these instructions to set up your wireless range extender in router mode.
1. C
W
R
E
ONNECT TO THE
IRELESS
ANGE
XTENDER
a. Disconnect any existing powerline devices.
7-4
Advanced Configuration of the WGX102
202-10042-02 v1.1