Rescan Key; Reset Key - Kyocera KM-4800w Operation Manual

2.9

ReScan Key

Press the ReScan Key to replace the previous scan image with a new one.
The sign "Rescan" is indicated in the upper right of the screen under Rescan Mode.
Rescan is use of if the wrong original is read, or if the scanner carries originals on the skew.
Rescan can be effective only in Copy Mode with set copy and Scan Mode.
Rescan is disabled in case no image exists for Rescan
Rescan is disabled in case of changing the destination to be saved.
Rescan Mode is cancelled when finished scanning the original.
Pressing the ReScan Key again is another measure to cancel Rescan Mode.
2.10

Reset Key

Press the Reset Key to initialize the settings in the current screen and delete images for
Recopy.
Acquired image files in the scan folders are not deleted with Reset.
Reset cannot be effective during copying or scanning.
The following settings do not change even if you press the Reset Key.
Paper Width/Media/Offset settings
Calibrate Mag. settings
Custom Magnification settings
Specified Cut Custom Length 1, 2 settings
8