Key Login - Kyocera 1102RX3NL0 Operation Manual

User Authentication and Accounting (User Login, Job Accounting) > Enabling User Login Administration

Key Login

Set whether or not login by arrow keys is allowed when user authentication is enabled.
NOTE
• This functions appears when the Card Authentication Kit is activated.
Card Authentication Kit(B) "Card Authentication Kit" (page 9-2)
• This function can only be used when the administrator logs in.
1
2
Display the screen.
1
[Menu] key > [▲] [▼] key > [User/Job Account] > [►] key
2
Enter the administrator ID and select the [OK] key.
NOTE
Enter an ID consisting of between 1 and 16 numbers.
Select the [▲] or [▼] key to enter a number.
Select the [◄] or [►] key to move the cursor left or right.
The factory default settings for the administrator ID is 4000.
3
Enter the administrator password and select the [OK] key.
NOTE
Enter a password consisting of between 0 (no settings) and 16 numbers.
Select the [▲] or [▼] key to enter a number.
Select the [◄] or [►] key to move the cursor left or right.
The factory default settings for the administrator password is 4000.
4
[▲] [▼] key > [User Login Set.] > [►] key
Configure the settings.
[▲] [▼] key > [Key Login] > [OK] key > [▲] [▼] key > [Prohibit] or [Permit] > [OK] key
7-4