Toneralert Level (Setting For The Alert Level For Toner Addition); Staple Position - Kyocera Ecosys FS-C8650DN Operation Manual

Clear Timer
Set the time until manual stapling mode is automatically cancelled.
Clear Timer:
(5 - 60)

Staple Position

Set the default Staple Position.
A4 Long Edge
Letter Long Edge
Staple Position: a b
1 ********************
A4 Long Edge
2
Letter Long Edge

TonerAlert Level (Setting for the alert level for toner addition)

This sets the toner addition alert level displayed.
Login User Name:
/******************-
Login Password:
1
2
a b
/5-sec.
3
4
Staple on the long side of A4 size.
Staple on the long side of letter size.
1
2
[ Exit ]
3
4
1
2
O
b
[ Login ]
In the Manual Staple menu, press
Press [OK]. The Clear Timer screen appears.
Use the numeric keys to set the clear time.
The setting range is 5 to 60 seconds (5-second increments).
Press [OK]. The clear time setting is stored and the Manual Staple
menu reappears.
In the Manual Staple menu, press
Position.
Press [OK]. The Staple Position screen appears.
Press or to select the desired staple position.
Press [OK]. The Staple Position is set and the Manual Staple
menu reappears.
In the Device Common menu, press
Level.
Press [OK]. The Login screen appears.
Note When user login administration is set:
• When logged in as an administrator, the log in screen is
not displayed and the TonerAlert Level menu screen
is displayed.
• The setting is not possible when logged in as anyone other
than an administrator. Log in again as an administrator.
6-79
Operation Panel
or to select Clear Timer.
or to select Staple
or to select TonerAlert