Kyocera Ecosys FS-C8650DN Operation Manual page 171

RA (Stateless) (RA (Stateless) setting)
Select whether or not to use RA (Stateless). The RA (Stateless) settings are available when selecting On for TCP/IP (IPv6).
The default setting is On.
IMPORTANT After changing the setting, restart the network, or turn the machine OFF and then ON. For detailed
information on restarting the network, refer to Restart Network (Restarting the network card) on page 6-47.
RA(Stateless):
1
Off
2 *On ********************-
DHCPv6 (DHCPv6 setting)
Select whether or not to use the DHCP (IPv6) server. The DHCP (IPv6) Settings are available when selecting On for TCP/
IP (IPv6). The default setting is On.
IMPORTANT After changing the setting, restart the network, or turn the machine OFF and then ON. For detailed
information on restarting the network, refer to Restart Network (Restarting the network card) on page 6-47.
DHCPv6:
1
Off
2 *On
********************-
1
In the IPv6 Setting menu, press
2
Press [OK]. The RA(Stateless) screen appears.
a b
3
Press
4
Press [OK]. The RA (Stateless) setting is set and the IPv6 Setting
menu reappears.
1
In the IPv6 Setting menu, press
2
Press [OK]. The DHCPv6 screen appears.
a b
3
Press
4
Press [OK]. The DHCPv6 setting is set and the IPv6 Setting menu
reappears.
6-45
or to select whether RA (Stateless) is enabled.
or to select whether DHCPv6 is enabled.
Operation Panel
or to select RA(Stateless).
or to select DHCPv6.