Kyocera Ecosys FS-C8650DN Operation Manual page 172

Protocol Detail (Detailed settings for the network protocol)
This selects the settings for Protocol Detail.
Item
NetBEUI
SNMPv3
FTP (Server)
SNMP
SMTP (E-mail TX)
POP3 (E-mail RX)
RAW Port
LPD
HTTP
LDAP
* : The machine must be restarted after the setting is changed.
×: The machine does not need to be restarted after the setting is changed.
Use the procedure below.
Protocol Detail: a b
1 ********************-
NetBEUI
2
SNMPv3
3
FTP(Server)
NetBEUI:
1
Off
2 *On ********************-
Description
Selects whether or not to receive
documents using NetBEUI.
Set SNMPv3.
Select whether or not to receive
documents using FTP.
Select whether or not to
communicate using SNMP.
Select whether or not to send e-
mail using SMTP.
Select whether or not to receive e-
mail using POP3.
Select whether or not to
communicate using RAW Port.
Select whether or not to receive
documents using LPD as the
network protocol.
Select whether or not to
communicate using HTTP.
Select whether or not to use LDAP. Off
1
2
[ Exit ]
3
4
a b
5
6
Default Setting
On
Off
On
On
Off
Off
On
On
On
In the TCP/IP Settings menu, press
Detail.
Press [OK]. The Protocol Detail menu screen appears.
Press or to select the item for which you want to make settings.
Press [OK]. This displays the setting screen for the item selected in
step 3.
The screen shown is the one when NetBEUI is selected.
Press or to select On or Off.
Press [OK]. The Protocol Detail menu reappears.
6-46
Operation Panel
Restarting the System*
×
×
×
×
or to select Protocol