Kyocera FS-C5150DN Operation Manual page 72

1 Firmware Version
This item shows the version and release date of the printer
firmware.
2 Printer Settings Information
This item shows various printer settings for hardware-related
items:
- MP tray paper size and type
- Paper cassette size and type
- Sleep time
- Formfeed timeout time
3 Installed Options
This item shows the options installed in the printer:
- Paper Feeder
- Hard disk
4 Network Status
This item shows the IP address, subnet mask address, and
default gateway address for the network interface card in the
printer.
5 Interface Information
This information shows the block status for items including the
USB memory slot and USB interface.
6 Memory
This item shows:
- Standard memory in the printer
- Option memory slot status in megabytes
- Total memory in the printer
- Current status of the RAM disk
7 Emulation
This item shows all available emulations of the printer. The
default setting for North America is KPDL (AUTO) emulation.
The default setting for all other regions is PCL 6 emulation. The
emulations are:
- PCL 6
- KPDL (AUTO)
- KPDL
8 Page Information
This shows counter information. Total printed page count and
total page count of each paper size are shown, and are itemized
by color/Black & White/total for each counter.
9 Consumable Status
This item shows the approximate level of remaining toner. When
the value is 100, the toner container is full. The closer to 0, the
smaller the amount of remaining toner.
4-14
Using the Operation Panel