Thin Print (Thin Print Setting); Thin Print Over Ssl (Thin Print Over Ssl Setting) - Kyocera FS-C5150DN Operation Manual

>ThinPrint
>ThinPrint
? On
>>ThinPrint over SSL
? On
Security Level (Security Level setting)
Security Level is primarily a menu used by service personnel for
maintenance work. There is no need for customers to use this menu.

Thin Print (Thin Print setting)

Select whether or not to use ThinPrint.
Note Thin Print is only supported in Europe (option).
1
After entering the administrator ID and password, press
>
repeatedly until >ThinPrint > appears.
2
Press [OK]. A blinking question mark (?) appears.
>
3
Select On or Off using
4
Press [OK].
5
Press [MENU]. The display returns to Ready.

Thin Print over SSL (Thin Print over SSL setting)

Select whether or not to use ThinPrintOverSSL.
SSL must be set to [On] in SSL Server (SSL Server setting) on page 4-66.
1
Press while >ThinPrint On > is displayed. >>ThinPrint
over SSL appears.
2
Press [OK]. A blinking question mark (?) appears.
3
Select On or Off using
4
Press [OK].
5
Press [MENU]. The display returns to Ready.
4-69
Using the Operation Panel
or .
or .
or