Kyocera FS-C5150DN Operation Manual page 62

Message
Self test
Please wait
Please wait
(Paper loading)
Please wait
(Adding toner)
Please wait
(Calibrating)
Please wait
(Cleaning)
Please wait
(Cooling)
Ready
Processing
Sleeping
Canceling data
Status Information
Meaning
The printer is performing self-diagnostics after power-up.
The printer is warming up and is not ready.
When the printer is switched on for the first time, this message will take several minutes.
This message appears when the printer is preparing to print coated paper (COATED) fed
from the optional paper feeder PF-530.
Toner is currently being replenished. This message may be displayed during continuous
printing of a large volume of pages which require a large amount of toner such as with
photographs, etc.
The color calibration function is being performed automatically as you powered on the
printer. You can also execute this function manually on the operation panel.
For details, refer to Color Calibration on page 4-79.
Displayed during main charger cleaning.
The printer is being cooled down and is not ready.
The printer is ready to print.
The printer is receiving data to print. This is also shown when the printer is reading a USB
memory, hard disk or RAM disk.
The printer is in Auto Sleep. The printer wakes from Auto Sleep whenever a print job is
received. The printer then warms up and goes on-line.
For details on Auto Sleep, refer to Sleep Timer (Sleep timer timeout time) on page 4-59.
Jobs inside the printer are being canceled. To cancel a job, refer to Canceling a Printing
Job on page 4-6.
Error Codes
Refer to the Troubleshooting on page 6-1.
4-4
Using the Operation Panel