I/F Block (Interface (External Device) Block Setting); Usb Host (Usb Memory Slot Setting); Usb Device (Usb Interface Setting) - Kyocera FS-C5150DN Operation Manual

>I/F Block
>>USB Host
? Unblock
>>USB Device
? Unblock
2
Press or
blinking cursor. Enter the specified password. Use
the cursor right and left. Enter a password consisting of between 0 (no
settings) and 16 numbers.
Note If you enter the incorrect administrator ID or password,
the message Wrong ID or Wrong Password appears and
the input screen then reappears. Re-enter the ID or password
correctly.
3
Press [OK]. The Security screen appears.

I/F Block (Interface (external device) block setting)

You can use this to lock and thereby protect the interface. The options
available in Interface Block are as follows:

• USB Host (USB memory slot setting)

• USB Device (USB interface setting)

• Optional Interface (Network interface card setting)
1
After entering the administrator ID and password, press
>
repeatedly until >I/F Block > appears.
USB Host (USB memory slot setting)
This locks and protects the USB memory slot (USB host). The default
setting is Unblock.
1
Press while >I/F Block > is displayed. >>USB Host appears.
2
Press [OK]. A blinking question mark (?) appears.
3
Select Block or Unblock using
4
Press [OK].
5
Press [MENU]. The display returns to Ready.
USB Device (USB interface setting)
This locks and protects the USB interface. The default setting is
Unblock.
1
Press while >I/F Block > is displayed. >>USB Device appears.
2
Press [OK]. A blinking question mark (?) appears.
3
Select Block or Unblock using
4
Press [OK].
5
Press [MENU]. The display returns to Ready.
4-63
to increase or decrease, respectively, the value at the
or
or
Using the Operation Panel
and to move
or
.
.