Copies (Number Of Copies); Paper Source (Selecting The Paper Feed Source); Remove Device (Removing The Usb Memory); Print File List (Printing A List Of The Files On A Usb Memory) - Kyocera FS-C5150DN Operation Manual

Copies
010
Paper Source
? Cassette 1
Paper Source
? Cassette 2
>Remove Device ?
>Print File List ?

Copies (Number of copies)

Sets the number of copies printed of the specified file in USB memory.
IMPORTANT To use this feature, an optional hard disk must be in-
stalled in the printer or the RAM disk must be set to On.
Note An optional hard disk can only be installed on the FS-
C5250DN.
1
While Copies in step 5 above is displayed, press
to display the number of copies. (E.g.: 10)
2
Press [OK]. Paper Source and a question mark (?) appears.

Paper Source (Selecting the paper feed source)

Sets the paper used for printing the specified file in USB memory.
1
While Paper Source in step 2 above is displayed, press
or and repeatedly until the paper source appears.
(For example : Cassette 2)
Note that menus shown in the list may vary depending on which
optional units installed in the printer.
2
Press [OK]. The message Processing appears and the printer
prints a file stored in a USB memory.

Remove Device (Removing the USB memory)

Specifies the setting for USB memory removal.
1
Press while USB Memory > is displayed.
2
Press or repeatedly until >Remove Device appears.
3
Press [OK]. A question mark (?) appears.
4
Press [OK] again. Menu display ends and the USB memory device
can be removed.

Print File List (Printing a list of the files on a USB memory)

This allows you to print a list of the files on a USB memory device.
1
Press while USB Memory > is displayed.
2
Press or repeatedly until >Print File List appears.
3
Press [OK]. A question mark (?) appears.
4
Press [OK] again. The message Processing appears and the
printer prints a list of files stored in a USB memory.
4-17
Using the Operation Panel
and or
and
and