C 12345 3 (Adjust Cyan) And Y 12345 3 (Adjust Yellow) - Kyocera FS-C5150DN Operation Manual

>>M 12345 3
MH=00000 MV=0
>>M 12345 3
MH=B0000 MV=0
> > M 1 2 3 4 5
M H = 0 0 0 0 0 M V = 0
MH-1
MH-2
MH-3
MH-4
MH-5
4
Press or
5
Press [OK]. 00000 or 0 will be displayed for each value and the
cursor (_) will flash under the H value.
6
In the color registration correction chart printed in Print Registration
Chart above, note the numbers of the sections in the magenta H and
V charts where the lines most closely coincide as a single straight
line. In the left example, the value would be B.
7
Press or
8
Use and
3 operation as you did for the H value in order to find the V values in the
color registration correction chart, and select those values on the
operation panel as well.
MV-3
9
Press [OK]. OK? and each of the entered values will be displayed. If
the numbers shown are correct, press [OK]. This completes the
settings for magenta.
Now continue to the settings for cyan and yellow.
C 12345 3 (Adjust Cyan) and Y 12345 3 (Adjust Yellow )
These options make detailed corrections to the registration for cyan (blue)
and yellow.
10
After completing the settings for magenta in step 9 above, press the
key. >>C 12345 3 and >>Y 12345 3 are displayed. As with
magenta, note down the values for cyan and yellow from the color
registration correction chart.
11
After completing the settings for all three colors, press [MENU]. The
display returns to Ready.
This completes the detailed color registration correction.
Note As confirmation, try printing the color registration correction
chart again. If the section where the lines most closely coincide
as a single straight line is not 0, redo the settings again from step
4 above.
IMPORTANT If the problem of skewed-color printout still persists
even after correcting the color registration, call for service.
4-85
repeatedly until >>M 12345 3 appears.
until that value is displayed.
to move the cursor right and left. Perform the same
Using the Operation Panel