HP Designjet 3D User Manual page 13

Cleaning tank level
Based on the model lid position, select either a full (upper lid position) or half (lower lid position)
cleaning tank level by pressing the cleaning tank level button. A full cleaning tank level is
approximately 15.14 L (4 gals.) and a half cleaning tank level is approximately 7.57 L (2 gals).
Cleaning agent bag(s)
Select the number of cleaning agent bag(s) to be used based on
Table 1 Cleaning Tank Level and Cleaning Agent Bags
Cleaning Tank Level
Half cleaning tank level
Full cleaning tank level
:
Do not use more than the specified amount of cleaning agent bags. Doing so will
NOTE
exceed pH levels for wastewater disposal.
Add cleaning agent bag
Follow the instructions below for adding the contents of the cleaning agent bag(s) to the
cleaning agent receptacle.
1. Dry hands before opening the cleaning agent bag.
2. Open the cleaning agent bag as shown.
Cleaning Agent Bag
1 cleaning agent bag
2 cleaning agent bags
Table 1 below.
Cleaning Models 9