Changing The Printer Driver Port Settings - Epson C323011 - TM J2000 B/W Inkjet Printer Installation Manual

Changing the Printer Driver Port Settings

To change the port settings of a printer driver such as the communication conditions for a serial
connection or the IP address of a printer using Ethernet connection, follow the procedure below.
Executing these steps changes the Epson Port settings.
Changing the port settings requires a reboot. Make sure to have the other applications closed
beforehand.
1. Open the Printers and Faxes screen.
2. Right click the printer driver whose settings you want to change and select [Properties].
3. The Properties screen of the printer appears. Select the [Ports] tab and click the
[Configure Port...] button.
4. The Configure Port screen appears. Change the settings then click the [OK] button.
5. The Follow Window screen appears. Click the [OK] button.
6. The Properties screen of the printer appears. Click the [Close] button.
7. The screen returns to the Printers and Faxes screen. Close the application and reboot the
system. The changes to the port becomes effective after the reboot.
Rev.B
Advanced Printer Driver Installation Manual
Serial
Ethernet
APD Installation and Setup 2-23