Epson C323011 - TM J2000 B/W Inkjet Printer Installation Manual page 51

PrinterName
Name of the printer driver to install. You can rename if you want to install with a
different name.
Printer settings during install
Specify whether the printer port settings will be in accordance with the APD
default values or the (copy) source values.
Printer Port Setting
Displays the current settings in the source. Only the TCP/IP port IP address can be
changed.
4. Return to the MakePackage screen. When installing multiple printer drivers, repeat
steps 2. and 3. for all printer drivers.
5. Select the "Uninstall TM/BA/EU drivers installed in the target PC" check box on the
MakePackage screen as required and click the [Package] button.
• Unchecked
If the same printer name as the one you are going to install already exists,
installation is performed after uninstalling only the printer of the same name.
• Checked
Uninstalls all printer drivers for EPSON TM printers present in the destination and
reboots the computer when uninstallation is complete. Then proceeds to the
installation.
Rev.B
• use default
The settings of the source are ignored and installed using the APD default
values (the default is LPT1).
• use current settings
The installation is done using the source setting values (the settings are
displayed at the bottom, in the Printer Port Setting area).
Advanced Printer Driver Installation Manual
Silent Installation 3-3