Chapter 3 Connecting Cables; Connecting Two Pcs To The Monitor; Connecting Signal Cables - Eizo FlexScan S2111W User Manual

Chapter 3 Connecting Cables

3-1 Connecting Two PCs to the Monitor

Two PCs can be connected to the monitor through the two DVI-I connectors on
the back of the monitor.
Connection examples
SIGNAL1
DVI Signal cable
(supplied FD-C39)
D-sub mini Signal cable
15-pin (FD-C16 option)
DVI Signal Cable
(FD-C39 option)
Selecting input signal
Input signal selection switch
Switch the input signal with
touched. When the signal is switched, the active signal type (Signal 1 or 2/
Analog or Digital) appears at the top right corner of the screen for two seconds.
24
Chapter 3 Connecting Cables
DVI-I connector DVI-I connector
(SIGNAL1) (SIGNAL2)
Signal cable
(supplied FD-C16)
Signal cable
(supplied FD-C16)
Signal cable
(supplied FD-C39)
. Input signal switches each time
SIGNAL2
D-sub mini
15-pin
D-sub mini
15-pin
DVI
is